Installation
Rear Lateral LinkINSTALLATION
CAUTION:
^ Be sure to use a new self-locking nut.
^ Always tighten bushings with wheels in full contact with the ground and the vehicle at curb weight.
1) Install in the reverse order of removal.
Tightening torque:
Rear lateral link
80 Nm (8.2 kgf-m, 59 ft-lb)
Shock absorber
120 Nm (12.2 kgf-m, 89 ft-lb)
Stabilizer link
60 Nm (6.1 kgf-m, 44 ft-lb)
2) Inspect the wheel alignment and adjust if necessary.