Removal

Front Stabilizer

REMOVAL

1) Lift up the vehicle, and then remove the left and right front wheels.
2) Remove the front under cover.
3) Remove the front stabilizer.
(1) Remove the left and right stabilizer links.





(2) Remove the left and right stabilizer brackets.





(3) Disconnect the left and right tie-rod ends.
a) Pull out the cotter pin (a).
b) Remove the castle nut (b).
c) Extract the tie-rod end (c) from the front axle housing.

CAUTION:
Be careful not to damage the boot during removal.

Preparation tool:
Tie-rod ball joint puller





(4) Turn the front stabilizer by approximately 180° toward the front of the vehicle and pull out the front stabilizer from the right side of the vehicle.