Front Seat Belt

Front Seat Belt




Removal
1. Disconnect negative (-) cable at battery.
2. Disable air bag system. Refer to "Disabling Air Bag System".
3. Remove center pillar lower trim.
4. Disconnect Yellow connector (1) from seat belt pretensioner (2).
a. Release locking of lock slider (3).
b. After unlocked, disconnect to connector.
5. Remove front seat belts from the vehicle.




Installation
Install in reverse order of removal, noting the following.
- Seat belt anchor bolts should have an unified fine thread (7/16-20 UNF). Under no circumstances should any different sized or metric screw threads be used.
- Connect Yellow connector (1) to seat belt pretensioner securely.
- Connect connector.
- Lock connector with lock slider (2).
- Enable air bag system. Refer to "Enabling Air Bag System".