Center High Mount Stoplamp Removal and Installation (For Hatchback Model)

Center High Mount Stoplamp Removal and Installation (For HATCHBACK Model)

Removal
1. Disconnect the negative battery cable.
2. Pry off the hatchback door upper garnish molding.




3. Remove the bolts and the CHMSL.

Installation

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

1. Install the CHMSL with the bolts.

Tighten: Tighten the CHMSL mounting bolts to 4 Nm (35 in. lbs.).




2. Connect the negative battery cable.