Three-Point Rear Seat Belt and Buckle (For Hatchback, Wagon Model)

Three-Point Rear Seat Belt and Buckle (For Hatchback,Wagon Model)

Removal
1. Remove the back shelf panel and C-pillar trim panel.





2. Remove the rear seat belt retractor securing bolts (LH, RH). The center seat belt retractor is not separately serviceable and should be replaced with rear seatback.





3. Remove the rear seat cushion.





4. Remove the floor seat belt anchor bolts.
5. Remove the seat belt.





Installation
1. Install the floor seat belt anchor bolts.

Tighten: Tighten the floor seat belt anchor bolts to 38 Nm (28 lb.ft).





2. Install the rear seat belt retractor securing bolts (LH, RH).

Tighten: Tighten the rear seat belt retractor securing bolts (LH, RH) to 38 Nm (28 lb.ft).





3. Install the rear seat cushion.





4. Install the back shelf panel and C-pillar trim panel with 4 securing screws.