Headliner: Service and Repair

HEAD LINING REMOVAL AND INSTALLATION

WARNING: Refer to Air Bag Warning before starting service work.

Removal
1. Remove sun visor (1).





2. Remove dome lights of front (1) and center (2).





3. Remove front pillar upper trims (1) rear side sill scuffs (2), center pillar inner lower trims (3), center pillar inner upper trims (4), back panel trim (5), rear quarter lower trims (6) and rear quarter upper trims (7).





4. Remove assistant grip (1).
5. Remove head lining clips (2) at rear end and remove head lining (3).





Installation
Reverse removal procedure noting the following.
^ Fix sun visor clip (1) first and adjust head lining in position and fix three clips (2) at rear end.
^ Tighten sun visor screw to specified torque.

^ Tightening torque
Sun visor screw a: 4 Nm (0.4 kgf-m, 3.0 ft. lbs.).