Except Advanced Air Bag

Deployed Air Bag (Inflator) Module and Activated Seat Belt Pretensioner





WARNING:
^ The air bag (inflator) module and seat belt pretensioner immediately after deployment/activation is very hot. Wait for at least 30 minutes to cool it off before proceeding the work.
^ Do not apply water, oil, etc. to deployed air bag (inflator) module and to activate seat belt pretensioner.
^ After an air bag (inflator) module has been deployed, the surface of the air bag may contain a powdery residue. This powder consists primarily of cornstarch (used to lubricate the bag as it inflates) and by-products of the chemical reaction. As with many service procedures, gloves and safety glasses should be worn.
^ Wash your hands with mild soap and water after completing the work.

Refer to the procedure described under Deployed Air Bag (Inflator) Module and Activated Seat Belt Pretensioner Disposal:Except advanced Air Bag for disposal.