Diesel Data: Automotive Repair
Home >> Suzuki >> 2008 >> Forenza L4-2.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Seals and Gaskets >> Service and Repair >> Removal and Replacement

Removal and Replacement

Drive Axle Oil Seal Removal and Installation
Removal
1. Disconnect the negative battery cable.
2. Remove the drive axles.
3. Remove the transaxle drive seal using a screwdriver. If necessary, crush the seal first with the screwdriver in order to loosen the seal from the case.





Installation
Tools Required:
DW2003001 Axle Seal Installer (LH)
DW2003002 Axle Seal Installer (RH)
1. Install the transaxle drive seal using the axle seal installer DW260-030-01 (LH) or DW260030-02 (RH).
2. Install the drive axles.
3. Connect the negative battery cable.




Diesel-Data.com