B1134

DTC B1134

DTC Detecting Condition and Trouble Area







DTC Confirmation Procedure

NOTE: Prepare all registered remote controllers before performing DTC confirmation procedure.

1. Push engine switch to change ignition mode to "ON".
2. Confirm that "Remote Controller Battery Warning" setting is "Active" mode.
3. Place remote controller within the keyless engine start operation area and open and close door more than 2 times
4. Repeat Step 3 six times.
5. Perform Step 3 and 4 with all of registered remote controllers.

DTC Troubleshooting

Step 1-2: