P0340

DTC P0340

DTC Detecting Condition and Trouble Area






Circuit Diagram

Circuit Diagram:

System Description
The CMP sensor located on the cylinder head consists of the signal generator (magnetic sensor) and signal rotor (fixed to intake camshaft).
The signal generator generates reference signal through slits in the signal rotor which turns together with the camshaft.

Reference signal
The CMP sensor generates 6 pulses of signals each of which has a different waveform length while the camshaft makes one full rotation.
Based on CMP sensor signal and CKP sensor signal, ECM judges which cylinder piston is in the compression stroke.

DTC Confirmation Procedure

NOTE:
- Be sure to troubleshoot first unexpected DTCs previously detected in "DTC Confirmation Procedure".
- Confirm that the following conditions are met in this "DTC Confirmation Procedure".
- Engine speed <= 2,000 rpm
- Battery voltage >= 11 V
- DTC P0335 is not detected.

1. Run engine at idle speed for 1 min.

DTC Troubleshooting

Step 1-3:

Step 4-5: