P2096
DTC P2096/P2097DTC Detecting Condition and Trouble Area
DTC Confirmation Procedure
WARNING:
- Perform road test in a place where there is no traffic to prevent an accident.
- Road test should be performed by two persons, a driver and a tester, on a level road.
NOTE:
- Be sure to troubleshoot first unexpected DTCs previously detected in "DTC Confirmation Procedure".
- Confirm that the following conditions are met in this "DTC Confirmation Procedure".
- DTC P0102, P0103, P0131, P0132, P0137, P0138, P0171, P0172 or P2237 is not detected.
1. Connect scan tool with ignition mode of keyless push start system in "OFF".
2. Warm up engine to normal operating temperature.
3. Drive vehicle at 100 km/h (62 mile/h) for 10 min.
DTC Troubleshooting
