Front Fender: Service and Repair

Front Fender Components

Front Fender Components:

Front Fender Removal And Installation

Removal

1. Remove front bumper and front bumper holder.
2. Remove cowl front fender cover, cowl top garnish and cowl top side garnish.
3. Remove headlight unit.
4. Remove side turn signal light.
5. Remove side sill guard.
6. Remove front fender lining.
7. Remove front pillar outer garnish.
8. Remove front fender and front fender rear pad.

Installation

Reverse removal procedure noting the following points.
- Adjust front fender panel clearance.
- Tighten front fender bolts to specified torque.
- If paint on front fender bolts is peeled off, be sure to apply paint again to prevent rust.
- Perform headlight aiming after installation.