Power Door Mirror On-Vehicle Inspection

Power Door Mirror On-Vehicle Inspection

Power Door Mirror Motor

1. Remove front door trim.
2. Disconnect power door mirror connector (1).
3. Check battery terminals to door mirror connector (1) as shown in following table and check operation of door mirror motor.
If check result is not as specified in the following operation, replace power door mirror.

Power door mirror motor operation










Mirror Heater (If Equipped)

1. Remove front door trim.
2. Disconnect power door mirror connector (1).
3. Check resistance between terminal "1" and terminal "2" of door mirror connector (1). If check result is not as specified, replace power door mirror.

Mirror heater resistance
Approx. 7.6 Ohms (25 °C) (77 °F)