Engine: Specifications

Tightening Torque Specifications

CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".








Oil pump





Oil pump bolt (M10) (a) 55 Nm (5.6 kg-m, 40.5 lbf-ft)
Oil pump bolt (M8) (b) 25 Nm (2.5 kg-m, 18.5 lbf-ft)

Exhaust manifold





Exhaust manifold bolt (a) 50 Nm (5.1 kg-m, 37.0 lbf-ft)
Exhaust manifold nut (b) 50 Nm (5.1 kg-m, 37.0 lbf-ft)

Water pump bolt 25 Nm (2.5 kg-m, 18.5 lbf-ft)

NOTE:
The specified tightening torque is described in the following.
Air Cleaner Components
Throttle Body and Intake Manifold Components
Cylinder Head Cover Components
Camshaft and Tappet Components
Engine Mountings Components
Timing Chain Cover Components
Timing Chain and Chain Tensioner Components
Valve and Cylinder Head Components
Piston, Piston Ring and Connecting Rod Components
Main Bearing, Crankshaft and Cylinder Block Components

Reference:
For the tightening torque of fastener not specified in this section, refer to Fasteners Information. Fasteners Information