Rear Seat Belt Removal and Installation
Rear Seat Belt Removal and InstallationWARNING: Be sure to read Precautions on Service and Diagnosis of Seat Belt before starting to work and observe every precaution during work.
Removal
1. Fold rear seats referring to "Folding Rear Seats" in Owners Manual (hatchback model).
2. Remove rear side sill scuff (1), quarter lower trim (2) and quarter upper trim (3) (hatchback model).
3. Remove partition trim referring to "Trunk Lid Removal and Installation" (Sedan model).
4. Remove rear seat belt referring to Rear Seat Belt Components.
Installation
Reverse removal procedure for installation noting the following.
- Seat belt anchor bolts should have an unified fine thread (7/16-20 UNF). Under no circumstances should any different sized or metric screw threads be used.