Parking Brake Cable: Service and Repair

Parking Brake Cable Removal and Installation

Removal

1) Release parking brake cables from rear brake calipers. Rear Brake Pad Removal and Installation
2) Remove console box. Center Console Box Removal and Installation
3) Loosen adjusting nut (1).





4) Remove parking brake cables from vehicle.

Installation

Install it by reversing removal procedure, noting the following points.

- Tighten each bolt to specified torque. Locations
- Inspect parking brake cable ends are installed to equalizer and levers of rear disc calipers securely.
- Adjust parking brake cable. Adjustments
- After adjusting parking brake lever stroke, make sure that brake system operates properly.