Receiver Dryer: Service and Repair

Desiccant Removal and Installation

Removal

1) Remove condenser assembly referring to Condenser Assembly Removal and Installation Condenser Assembly Removal and Installation:Manual A/C.
2) Remove circlip (4) using special tool.
Special Tool
09900-06107

3) Remove the cap (1) from the receiver / dryer tank (2).
4) Remove desiccant (3).






Installation

Reverse the removal procedure noting the following instructions.

- Replenish specified amount of compressor oil to compressor suction side referring to in Service and Repair Operation Procedure for Refrigerant Charge:Manual A/C.
- Do not remove desiccant from the plastic bag until just before inserting it into the receiver.
- Apply compressor oil to O-ring (1).
- Be sure to install circlip (2) with its flat face (3) directed to cap.
- Install condenser assembly referring to Condenser Assembly Removal and Installation Condenser Assembly Removal and Installation:Manual A/C.
- Evacuate and charge the A/C system referring to "Evacuation" and "Charge" in Service and Repair Operation Procedure for Refrigerant Charge:Manual A/C.