G57 & G58 Transmissions

COMPONENTS





DISASSEMBLY OF COUNTER GEAR ASSEMBLY

REMOVE HUB SLEEVE NO.3, SHIFTING KEYS AND SPRINGS
Using a screwdriver, remove hub sleeve No.3, three shifting keys and two springs.





REPLACEMENT OF BEARING

IF NECESSARY, REPLACE COUNTER GEAR FRONT BEARING
(a) Using snap ring pliers, remove the snap ring.





(b) Using SST, press out the bearing.
SST 09950-00020
(c) Replace the side race.





(d) Using a socket wrench, press in the bearing, side race and inner race.








(e) Select a snap ring that will allow minimum axial play and install it on the shaft.





ASSEMBLY OF COUNTER GEAR ASSEMBLY

INSTALL HUB SLEEVE NO.3, SHIFTING KEYS AND SPRINGS
(a) Install the clutch hub and shifting keys to the hub sleeve.
(b) Install the shifting key springs under the shifting keys.
NOTICE: Install the key springs positioned so that their end gaps are not in line.