Technical Instruction For I.I.A. Igniter Unit Replacement (SSC # H03)

WORK PROCEDURE FOR VAN & CARGO VAN:

1984/1985 VAN & CARGO VAN

Instructions for inspection and, if necessary, replacement of the igniter assembly on 1984/1985 Van & Cargo Van models are explained in the following Sections I through IX.

Section I Work Procedure for Van and Cargo Van

Separate Nut Terminal:

Welded Nut Terminal:

Section II Preliminary Procedure (see page 30 & 31)

Section III Igniter I.D. Marks (see page 32)

Section IV Fuse EFI (15A) Removal (see page 33)

Section V Igniter Removal and Replacement Procedure
(A) Igniter Removal (see page 34)
(B) Igniter Replacement (see page 35, 36, and 37)

Section VI Fuse EFI (15A) Reinstallation (see page 37)

Section VII Completion Label (see page 38)

Section VIII Inspection/Replacement Reimbursement Procedures (see page 38)

REQUIRED PARTS:*

Part Number Description Quantity

89620-14210-68 Igniter Assembly 1

*For replacement of igniter, use only those that are properly identified by "Short Black" or "Short Green" color marks. (See Section III)