Assembly of Shift and Select Lever Assembly

ASSEMBLY OF SHIFT AND SELECT LEVER ASSEMBLY



1. COAT SHAFT WITH MP GREASE. AS SHOWN




2. INSTALL DUST BOOT AND CONTROL SHAFT COVER
a. Install the dust boot to the control shaft cover as shown.




b. Install the control shaft to the control shaft cover.




3. INSTALL SNAP RING
Using a brass bar and hammer, install the snap ring.




4. INSTALL SELECT INNER LEVER
a. Install the No.1 select spring seat, No.1 compression spring and select inner lever.




b. Using a pin punch and hammer, drive in the slotted spring pin.
c. Check that the No.1 select spring seat slide smoothly.




5. INSTALL SHIFT INTERLOCK PLATE AND NO.1 SHIFT INNER LEVER
a. Install the shift interlock plate and No.1 shift inner lever as shown.




b. Using a pin punch and hammer, drive in the slotted spring pin.




6. INSTALL NO.2 SHIFT INNER LEVER
a. Install the No.2 shift inner lever, No.2 compression spring and No.2 select spring seat.




b. Compress the spring and install the snap ring with pliers.




c. Using a pin punch and hammer, drive in the slotted spring pin.
d. Check that the No.2 select spring seat slide smoothly.