Center Driveshaft

DISASSEMBLY OF CENTER DRIVE SHAFT





1. REMOVE DUST COVERS
(a) Using a press press out the transaxle side dust cover.





(b) Using SST and a press, press out the drive shaft side dust cover.
SST 09950-00020





2. REMOVE SNAP RING
Using snap ring pliers, remove the snap ring.





3. REMOVE BEARING
(a) Using a press, press out the bearing.

(b) Remove the snap ring.

ASSEMBLY OF CENTER DRIVE SHAFT





1. INSTALL BEARING
(a) Install the snap ring to the center drive shaft.

(b) Using a press and extension bar, press in the bearing.





(c) Using snap ring pliers, install a new snap ring.

2. INSTALL DUST COVERS
(a) Using a press, press in the drive shaft side dust cover.





HINT: The clearance between the dust cover and the bearing should be kept in the range shown in the image.

(b) Using a press, press in the transaxle side dust cover.