Windows - Door Glass Adjustment Procedures

90toyota10

REFERENCE BODY
NUMBER 053
DATE 12-28-90
MODEL AT, ST


TITLE 1990 CELICA DOOR ADJUSTMENT/REPAIR PROCEDURES


This information is to correct an omission in the 1990 Celica Repair Manual door glass adjustment procedures.





CONDITION:

The door trim supports, page BO-12 of the 1990 Celica Repair Manual, are not adjustable. There are three (3) different part numbers to accommodate varied door panel opening widths (see illustration).


CORRECTION:

Measure the width of the door panel opening and select the correct support according to the chart below. Proper measurements should be taken with the door glass and belt molding removed.


Opening width mm(in.) Stamped no. Part Number

32.0 (1.26) 1 67231-20051

32.1 (1.26)-34.1(1.34) 2 67231-20061

34.2 (1.35) 3 67231-20071


NOTE: This procedure should only be necessary in case of body damage or door replacement.