With A131L Transaxle

COMPONENTS

DISASSEMBLY OF INTERMEDIATE SHAFT




1. REMOVE INTERMEDIATE SHAFT FRONT BEARING

Using SST, press out the bearing.
SST: 09950-00020




2. REMOVE INTERMEDIATE SHAFT REAR BEARING Using SST, press out the bearing.

SST: 09350-32014 (09351-32090), 09950-00020

ASSEMBLY OF INTERMEDIATE SHAFT

1. INSTALL INTERMEDIATE SHAFT REAR BEARING




Using SST, press in a new bearing.

SST 09350-32014 (09351-32150)

2. INSTALL INTERMEDIATE SHAFT FRONT BEARING




a. Using SST, press in a new bearing.

SST 09350-32014 (09351-32090, 09351-32120)




b. Check that the distance from the gear flange end to the intermediate shaft end is 115.8 mm (4.559 in.).