Heater Control Valve: Service and Repair

WATER VALVE REMOVAL







1. Drain Engine Coolant From Radiator

REMOVAL HINT: It is not necessary to drain out all the coolant.

2. Disconnect Water Valve Control Cable

INSTALLATION HINT: For installing control cable, refer to "A/C Control cables adjustment" Adjustments

3. Disconnect Water Hoses From Heater Radiator Pipe And Water Valve


4. Remove Water Valve
Remove the bolt and water valve.

INSTALLATION HINT:
- Push the water hose onto the heater radiator pipe as far as the ridge on the pipe.







- Install the hose clip in a position, as shown in the illustration.

WATER VALVE INSTALLATION
Installation is in the reverse order of removal.