Electrical Specifications

TIMING:

Base Ignition Timing 10° BTDC At Idle [1]
Advance Ignition Timing 5 - 15° BTDC At Idle [1]

[1] Refer to ADJUSTMENT PROCEDURES.

RESISTANCE:

Ignition Coil:
Primary (Cold) 1.25 - 1.56 Ohms
Secondary (Cold) 10.4 - 14.0K Ohms

Oxygen Sensor Heater
Federal (Cold) 4.95 - 6.05 Ohms
California (Cold) 5.1 - 6.3 Ohms

Distributor Signal Generator;
Between terminals G1 and G- 140-180 Ohms
Between terminals Ne and G- 140-180 Ohms

Coolant Temperature and Air Temperature Sensors:
At -20°C (-4°F) 10-20K Ohms
At 0°C (32°F) 4-7K Ohms
At 20°C (68°F) 2-3K Ohms
At 40°C (104°F) 0.9-1.3K Ohms
At 60°C (140°F) 0.4-0.7K Ohms
At 80°C (176°F) 0.2-0.4K Ohms


Throttle Position Sensor:

THROTTLE OPENING ANGLE CLEARANCE BETWEEN BETWEEN TERMINALS
(from vertical) STOP SCREW AND LEVER IDL-E2 PSW-E2

-- 0.60mm(.024in) C NC
-- 0.80mm(.032in) NC NC
Less than 7.5° -- C NC
73°(M/T) 63°(A/T) -- NC NC
79°(M/T) 69°(A/T) -- NC C

C=continuity
NC=no continuity