With A240L Transaxle

REPLACE TRANSAXLE FLUID





- Remove the drain plug and drain the fluid.
- Install the drain plug.





- Add new fluid through the filler tube.
Fluid type: ATF DEXRON (R) II
Capacity: 7.2 liters (7.6 US qts, 6.3 Imp. qts)
Drain and refill: 3.1 liters (3.3 US qts, 2.7 Imp. qts)





- Start the engine and shift the selector into all positions from P through L and then shift into P.
- With the engine idling, check the fluid level. Add fluid up to the COOL level on the dipstick.
- Check the fluid level with the normal fluid temperature (70 - 80 °C or 158 - 176 °F) and add as necessary.

NOTE: Do not overfill.