Shift Cable

INSPECT AND ADJUST SHIFT CABLE
When shifting the shift lever from the N position to other positions, check that the lever can be shifted smoothly and accurately to each position and that the position indicator correctly indicates the position.
If the indicator is not aligned with the correct position, carry out the following adjustment procedures.




a. Remove the No.2 engine under cover.




b. Loosen the nut on manual shift lever.
c. Push the manual lever fully toward the right side of the vehicle.
d. Return the lever two notches to NEUTRAL position.
e. Set the shift lever to N.
f. While holding the lever lightly toward the R range side, tighten the nut.