Throttle Cable

INSPECT AND ADJUST THROTTLE CABLE
a. Depress the accelerator pedal all the way and check that the throttle valve opens fully.

HINT: If the valve does not open fully, adjust the accelerator cable.

b. Fully depress the accelerator.
c. Loosen the adjustment nuts.
d. Adjust the outer cable so that the distance between the end of the boot and stopper on the cable is the standard.

Standard boot and cable stopper distance: 0 - 1 mm (0-0.04 in.)

e. Tighten the adjusting nuts.
f. Recheck the adjustments.