Vehicle - Specifications

89toyota11

PRODUCT GENERAL
REFERENCE INFORMTION
NUMBER 020
DATE 11-17-89
MODEL 1990 CRESSIDA
(MX)
TITLE 1990 CRESSIDA SPECIFICATIONS


Vehicle Model and Codes:

VDS OF
BODY TYPE TRANSMISSION VIN MODEL NO.
4-Door Luxury Sedan 4-speed Automatic MX83E 3125


Dimensions:
in. mm
Overall Length 189.6 4815
Overall Width 67.3 1710
Overall Height 54.5 1384
Wheel Base 105.5 2680
Front Tread 57.3 1455
Rear Tread 57.3 1455
Ground Clearance 5.3 135


Weights (Pounds):

Model No. Curb Weight
3125 3417 lb. (1550 kg)

Engine:
Model 7M-GE
Type 6 cylinder in-line, DOHC, 24V, gas
Displacement 180.2 cu.in.(2954 cc)
Bore and Stroke 3.27 x 3.58 in. (83.0 x 91 mm)
Compression Ratio 9.2:1
Compression Press. STD 156 psi @ 250 rpm, LIMIT 128 psi
HP (SAE Net) 190 @ 5600 rpm
Torque (SAE Net) 185 ft.lbs. @ 4400 rpm

Ignition System:
Spark Plug Type
Nippondenso PQ16R (Platinum tipped spark plugs)
NGK BCPR5EP11
Spark Plug Gap 0.043 in. (1.1 mm)
Firing Order 1-5-3-6-2-4

Ignition Timing: 100 BTDC @ Idle, Check connector shorted

Idle Speed: 700 RPM
Valve Clearance:

Intake .006 - .010 in. (0.15 - 0.25 mm)
Exhaust .008 - .012 in. (0.20 - 0.30 mm)

Cooling system

Type Water cooled
Radiator Vertical flow fin and tube
Radiator Cap Opening
Pressure 11 - 15 psi (0.75 - 1.05 kg/sq.cm)
Water Pump Centrifugal v-belt drive
Thermostat, Open. Temp. 190~F (88~C)
Cooling System Cap.
w/Heater 8.8 qts. (8.3 liter)

Fuel System:

Type of Fuel Distribution Electronic fuel injection
Fuel Pump Type Electric
Fuel Pump Pressure 38 - 44 psi (2.7 - 3.0 kg/sq.cm)
Fuel Filter Type Paper filter element
Fuel Tank Capacity 18.5 gal. (70 liter)

Fuel Grade USE ONLY UNLEADED FUEL

(R+M)/2 Octane 87 or higher

For improved performance Premium Unleaded (R+M)/2 Octane 91

Lubrication System:

Type Mechanical
Oil Pump Gear type
Oil Filter Capacity 0.4 qt. (0.3 liter)
Recommended Motor Oil API grade SF or better
Oil Capacity w/filter 4.7 qts. (4.4 liter) Drain/refill

Electrical System:

Battery (volts/amp hours) 12V/70A-hr
Alternator (volts/amps) 12V/80A
Starter Motor (volts/kW) 12V/1.4 kW

Steering:

Type Rack and Pinion, power assisted
Gear Ratio 19.43 to 1
Turning Circle
Curb to curb 32.8 ft. (10.0 m)
Alignment, Front wheel (Unloaded):
Service Check Service Reset
Front Caster 7~ 20' +/- 45' 7~ 20' +/- 30'
Front Camber 0~ 30' +/- 45' 0~ 30' +/- 30'
Front Toe-In 0.08 + 0.16 in. 0.08 +/- 0.04 in.
(2 +/-2 mm) (2 +/- 1 mm)

Aligriment, Rear Wheel (Unloaded):
Rear Camber 0~ +/- 45' 0~ +/- 30'
Rear Toe-In 0.08 +/- 0.16 in. 0.08 +/- 0.08 in.
(2 +/- 4 mm) (2 +/- 2 mm)

Suspension:
Front MacPherson strut, coil spring, lower lateral
link, link type stabilizer bar.

Rear Independent rear suspension, double wishbone,

coil springs, link type stabilizer bar.

Axle, Rear:
Type Hypoid gear
Differential Ratio 3.909:1
Ring Gear Size 8.1 in. (205 mm)
Lubricant Capacity 1.4 qt. (1.3 liter)
Lubricant Type API GL-5 SAE 90
SAE 80W90 or 80W (below O~F)

Tires:
Size, Type 195/65 R15 90H, Radial

Brakes:
Type Front disc, rear disc
Front Floating caliper, vented rotor
Rear Floating caliper, vented rotor
Parking Brake Mechanically operated on rear
wheels
Front Disc Diameter, Overall 10.9 in. (277 mm)
Rear Disc Diameter 10.6 in. (270 mm)

Transmission:
Automatic (A340E)
Gear Ratio First 2.804
Second 1.531
Third 1.000
Fourth 0.705
Rev. 2.393

Fluid Capacity 7.6 qt. (7.2 liter) Dry fill
1.7 qt. (1.6 liter) Drain/refill

Fluid Type DEXRON(R) II ATF