Ignition Coil Pack: Service and Repair

Air Cleaner Hose Removal:

1. Disconnect air cleaner hose.

2. Disconnect cruise control, accelerator, and automatic throttle cables.

3. Disconnect six hoses from ISC pipe.

ISC Pipe Removal:

4. Remove the two retaining bolts and remove the ISC pipe.

5. Remove the oxygen sensor wire from the two clamps.

6. Disconnect the #4 PCV hose from the PCV pipe.

PCV Pipe Removal:

7. Remove the two retaining bolts. Remove the PCV pipe with hoses from cylinder head covers and throttle body.

8. Disconnect the air valve hose from the intake air connector.

Intake Air Connector Removal:

9. Loosen the clamps and remove the intake air connector retaining bolts. Remove the intake air connector.

10. Remove the oil filler cap.

Ignition Coil Cover Removal And Installation:

11. Remove the five retaining nuts and the ignition coil pack cover.

12. Remove the coil pack retaining bolt and remove ignition coil pack.