Brake Pad: Service and Repair

Fig. 2 Exploded View Of Disc Brake Assembly.1989:

Fig. 3 Exploded View Of Disc Brake Assembly. 1990-92:

1. Raise and support front of vehicle, then remove wheel and tire assembly.
2. Remove two caliper mounting bolts, then remove caliper. Do not allow caliper to hang by brake hose.
3. Remove inner pad, then remove outer pad and anti-squeal shim(s), Figs. 2 and 3.
4. Remove anti-rattle spring and pad guide plate.
5. Remove pad support plate and anti-squeal shim(s).
6. Reverse procedure to install.