Electrical Specifications

TIMING:

Base Ignition Timing 10° BTDC At Idle [1]
Advance Ignition Timing 7-17° BTDC At Idle [1]

[1] Refer to ADJUSTMENT PROCEDURES.

RESISTANCE:

Ignition Coil:
Primary (cold) 0.4-0.5 Ohms
Secondary (cold) 10.2-13.8K Ohms

Distributor Signal Generator:
Between terminals G+ and G- 140-180 Ohms
Between terminals Ne+ and Ne- 140-180 Ohms

Coolant Temperature and Air Temperature Sensors:
At -20°C (-4°F) 10-20K Ohms
At 0°C (32°F) 4-7K Ohms
At 20°C (68°F) 2-3K Ohms
At 40°C (104°F) 0.9-1.3K Ohms
At 60°C (140°F) 0.4-0.7K Ohms
At 80°C (176°F) 0.2-0.4K Ohms

Throttle Position Sensor:

THROTTLE OPENING ANGLE CLEARANCE BETWEEN BETWEEN TERMINALS
(from vertical) STOP SCREW AND LEVER IDL-E2 PSW-E2

-- 0.60mm(.024in) C NC
-- 0.80mm(.032in) NC NC
Less than 7.5° -- C NC
41° -- NC NC
51° -- NC C

C=continuity
NC=no continuity