Manual A/C

(Manual A/C)
1. REMOVE FRONT DOOR SCUFF PLATE LH
2. REMOVE COWL SIDE TRIM LH
3. REMOVE LOWER FINISH PANEL
4. REMOVE INSTRUMENT PANEL FINISH LOWER LH PANEL

5. REMOVE BLOWER RESISTOR
a. Disconnect the connector.
b. Remove the 2 screws and blower resistor.







6. INSPECT BLOWER RESISTOR RESISTANCE
Measure resistance between terminals, as shown in the chart.
If resistance is not as specified, replace the blower resistor.




7. INSTALL BLOWER RESISTOR
a. Install the blower resistor with the 2 screws.
b. Connect the connector.

8. INSTALL INSTRUMENT PANEL FINISH LOWER LH PANEL
9. INSTALL LOWER FINISH PANEL
10. INSTALL COWL SIDE TRIM LH
11. INSTALL FRONT DOOR SCUFF PLATE LH