Rear

REPLACEMENT
1. REMOVE REAR WHEEL
2. REMOVE BRAKE CALIPER AND DISC
a. Remove the 2 bolts, brake caliper and disc.
b. Support the brake caliper securely.





3. REMOVE HUB BOLT
Using Special Service Tool (SST), remove the hub bolt.
(SST) 09628-10011





4. INSTALL HUB BOLT
Install a washer and nut to the hub bolt, as shown in the illustration, and install the hub bolt by tightening the nut.
5. INSTALL DISC AND BRAKE CALIPER
Install the disc and brake caliper with the 2 bolts.

Torque: 47 Nm (475 kgf-cm, 34 ft. lbs.)

6. INSTALL REAR WHEEL

Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)