Replacement

REPLACEMENT

NOTE:
- Do not give a shock to the throttle position sensor.
- Do not disassemble or adjust the throttle opener.

1. REPLACE THROTTLE POSITION SENSOR




a. Remove the 2 screws and throttle position sensor.




b. Reinstall a new throttle position sensor.
1. Check that the throttle valve is fully close.
2. Insert the sensor to the throttle body with it turned counterclockwise by 30 ° to 60 ° against the fully- close valve position.
3. By turning the sensor clockwise, tighten the 2 screws.




2. REPLACE IAC VALVE
a. Remove the 4 screws, bracket, IAC valve and gasket.
b. Place a new gasket on the No.1 throttle body.
c. Reinstall a new IAC valve with the 4 screws and bracket.

3. REPLACE THROTTLE BODIES




a. Remove the 2 screws and protector.





b. Remove the 6 screws, No.1 throttle body, No.2 throttle body and 2 gaskets from the No.1 intake air control valve.




c. Place 2 new gaskets and 2 new O-rings as shown in the illustration.




d. Reinstall a new No.1 throttle body and No.2 throttle body with the 6 screws.

Torque: 6.9 Nm (70 kg.cm, 61 in.lb)