Component Tests and General Diagnostics

INSPECTION





1. INSPECT TIRE
a) Check the tires for wear and proper inflation pressure.





Cold tire inflation pressure:

b) Check the tire runout.
Tire runout: 1.0 mm (0.039 inch) or less





2. ROTATING TIRES

HINT: See the illustration for tire rotation.





3. INSPECT WHEEL BALANCE
a) Check and adjust the Off-the-car balance.
b) If necessary, check and adjust the On-the-car balance.
Imbalance after adjustment: 8.0 g (0.018 lb.) or less





4. CHECK WHEEL BEARING LOOSENESS
a) Check the backlash in the bearing shaft direction.
Maximum: 0.05 mm (0.0020 inch)
b) Check the axle hub deviation.
Maximum: 0.05 mm (0.0020 inch)
5. CHECK FRONT SUSPENSION FOR LOOSENESS
6. CHECK STEERING LINKAGE FOR LOOSENESS
7. CHECK BALL JOINT FOR LOOSENESS
8. CHECK SHOCK ABSORBER WORKS PROPERLY
^ Check that oil leaks
^ Check mounting bushings for wear
^ Bounce front and rear of the vehicle