Removal and Installation

REMOVAL

1. REMOVE AIR CLEANER CAP
2. REMOVE BATTERY AND TRAY
3. REMOVE CRUISE CONTROL ACTUATOR
a. Disconnect the actuator connector and clamp.
b. Remove the 3 bolts, and disconnect the actuator with the bracket.

4. REMOVE STARTER
a. Disconnect the starter connector.
b. Remove the nut, and disconnect the starter cable.
c. Remove the 2 bolts, throttle cable clamp and starter.

Torque: 39 N.m (400 kgf.cm, 29 ft.lbf)

INSTALLATION
Installation is in the reverse order of removal.