Airbag Sensor Assembly

CAUTION: Be sure to perform the initialization of the occupant classification ECU under the conditions listed below. If the initialization is not performed, the SRS may not operate properly.
- The occupant classification ECU is replaced.
- Accessories (seatback tray or seat cover, etc.) are installed to the vehicle.
- The passenger seat is removed from the vehicle.
- Both the SRS warning light and passenger airbag ON/OFF indicator light ( OFF ) come on.
- The vehicle is brought to the workshop for repair purpose due to the accident or collision.

VEHICLE NOT INVOLVED IN COLLISION
Perform a diagnostic system check.

VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
Perform a diagnostic system check.

VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED
Replace the airbag sensor assy center.