Floor Shift Cable Transmission Control Shift
REPLACEMENT1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSY
2. REMOVE AIR CONDITIONING RADIATOR ASSY
3. REMOVE AIR BAG SENSOR ASSY CENTER
4. REMOVE BATTERY
5. REMOVE AIR CLEANER ASSY
6. REMOVE AIR CLEANER HOSE NO.1
7. REMOVE INTAKE AIR RESONATOR SUB-ASSY
8. DISCONNECT SHIFT CABLE GROMMET RETAINER NO.2
a. Remove the 2 bolts and disconnect shift cable grommet retainer No.2.
9. REMOVE FLOOR SHIFT CABLE TRANSMISSION CONTROL SHIFT
a. Remove the nut from the control shaft lever.
b. Disconnect the control cable from the control shaft lever.
c. Remove the clip and disconnect the control cable from the control cable bracket.
d. Disconnect the control cable from the control cable clamp.
e. Disconnect the floor shift cable from the transmission floor shift assy.
f. Pull out the control cable from the body.
g. Remove the shift cable grommet retainer No. 2.
10. INSTALL FLOOR SHIFT CABLE TRANSMISSION CONTROL SHIFT
a. Put in the control cable to the body.
b. Install the shift cable grommet retainer No.2 to the floor shift cable.
c. Install the floor shift cable as shown in the illustration.
HINT:
^ Install it with the uneven surface facing to up.
^ Fit the claws securely.
d. Connect the control cable to the control cable clamp.
e. Install the control cable and a new clip to the bracket.
f. Temporarily install the control cable to the control shaft lever with nuts.
11. INSTALL SHIFT CABLE GROMMET RETAINER NO.2
a. Install the shift cable grommet retainer No.2 with the 2 bolts.
Torque: 4.9 Nm (50 kgf-cm, 43 inch lbs.)
12. INSTALL AIR BAG SENSOR ASSY CENTER
13. INSTALL AIR CONDITIONING RADIATOR ASSY
14. ADJUST SHIFT LEVER POSITION
15. INSPECT SHIFT LEVER POSITION
16. INSTALL INTAKE AIR RESONATOR SUB-ASSY
17. INSTALL AIR CLEANER HOSE NO.1
18. INSTALL AIR CLEANER ASSY
19. INSTALL BATTERY