ABS Warning Light Circuit (Remains On)

ABS WARNING LIGHT CIRCUIT (REMAINS ON)

CIRCUIT INSPECTION

If the ECU detects trouble, it will prohibit control, turn on the ABS warning light, and store the DTC. Connect terminals Tc and CG of the DLC3 to make the ABS warning light blink and output the DTC.

Wiring Diagram:

Step 1 - 3:

Step 4 - 5:

INSPECTION PROCEDURE

HINT: Start the inspection from step 1 when using the hand-held tester and start from step 2 when not using the hand-held tester.