Brake Rotor/Disc: Specifications

Front brake disc thickness
Standard thickness 28.0 mm (1.102 inch)
Minimum thickness 26.0 mm (1.024 inch)
Front brake disc runout
Maximum disc runout 0.05 mm (0.0020 inch)
Rear disc brake thickness
Standard thickness 12.0 mm (0.472 inch)
Minimum thickness 10.5 mm (0.413 inch)
Rear brake disc runout
Maximum disc runout 0.15 mm (0.0059 inch)
Rear disc brake cylinder mounting set bolt
TMC made 61.8 Nm (630 kgf-cm, 46 ft. lbs.)
TMMK made 47 Nm (475 kgf-cm, 34 ft. lbs.)
Rear disc brake cylinder slide pin x Rear disc brake cylinder mounting
TMC made (Upper side) 34.3 Nm (350 kgf-cm, 25 ft. lbs.)
TMC made (Lower side) 39.2 Nm (400 kgf-cm, 29 ft. lbs.)
TMMK made 43 Nm (440 kgf-cm, 32 ft. lbs.)
Rear disc brake cylinder x Flexible hose 29.4 Nm (300 kgf-cm, 22 ft. lbs.)