Driver's Door Window Goes Down During Auto Up Operation

DRIVER'S DOOR WINDOW GOES DOWN DURING AUTO UP OPERATION

HINT: This circuit is only for the w/ jam protection models.

CIRCUIT DESCRIPTION

The power window regulator master switch assembly controls the driver's power window. With the limit switch ON, when the pulse change in the pulse sensor that detects the motor revolution with in the operation range of the jam protection, it is recognized as something being caught and so the motor operation will be recessed. This also occurs when the limit switch OFF position and the door glass full closed position are not in place by replacing and installing the motor. If this occurs, reset the driver's power window regulator motor (initial position setting of the limit switch).

Wiring Diagram:

Step 1 - 3:

Step 4 - 5:

INSPECTION PROCEDURE