Connecting Rod, Engine

Connecting rod thrust clearance
Standard 0.160 - 0.342 mm (0.063 - 0.135 inch)
Maximum 0.342 mm (0.135 inch)

Connecting rod oil clearance
Standard 0.028 - 0.060 mm (0.0011 - 0.0024 inch)
Maximum 0.080 mm (0.0032 inch)

Connecting rod large end bore diameter
1 47.000 -47.008 mm (1.85039-1.85071 inch)
2 47.009 - 47.016 mm (1.85075 - 1.85102 inch)
3 47.017 - 47.024 mm (1.85106 - 1.85134 inch)

Connecting rod bearing thickness
1 1.486 - 1.490 mm (0.05850 - 0.05866 inch)
2 1.491 - 1.494 mm (0.05870 - 0.05882 inch)
3 1.495 - 1.498 mm (0.05886 - 0.05898 inch)

Connecting rod small end bore diameter
A 20.012 - 20.015 mm (0.78787 - 0.78799 inch)
B 20.016 - 20.018 mm (0.78803 - 0.78811 inch)
C 20.019 - 20.021 mm (0.78815 - 0.78823 inch)

Connecting rod
Out-of alignment Maximum 0.05 mm (0.0020 inch) per 100 mm (3.94 inch)
Twist Maximum 0.05 mm (0.0020 inch) per 100 mm (3.94 inch)

Connecting rod bolt diameter
Standard 6.6 - 6.7 mm (0.260 - 0.264 inch)
Maximum 6.4 mm (0.252 inch)

Connecting rod cap x Connecting rod 20 Nm (204 kgf-cm, 15 ft. lbs.)