System Specifications

Cylinder block warpage Maximum 0.05 mm(O.0020 inch)

Cylinder bore diameter 79.000 - 79.013 mm (3.1102 - 3.1108 inch)

Cylinder block journal bore diameter
0 52.000 - 52.002 mm (2.04724 - 2.04732 inch)
1 52.003 - 52.004 mm (2.04736 - 2.04740 inch)
2 52.005 - 52.006 mm (2.04744 - 2.04748 inch)
3 52.007 - 52.009 mm (2.04752 - 2.04760 inch)
4 52.010 - 52.011 mm (2.04764 - 2.04768 inch)
5 52.012 - 52.013 mm (2.04772 - 2.04776 inch)
6 52.014 - 52.015 mm (2.04788 - 2.04783 inch)

Cylinder block sub-assy x Stud bolt
A, C, D and E 5.0 Nm (51 kgf-cm, 44 inch lbs.)
B 11 Nm (112 kgf-cm, 8 ft. lbs.)

Cylinder block water drain cock sub-assy x Cylinder block sub-assy 25 Nm (255 kgf-cm, 18 ft. lbs.)