Differential: Specifications

Front differential side gear backlash 0.05 - 0.20 mm (0.0020 - 0.0079 inch)

Front differential pinion thrust washer thickness 0.92 mm (0.0362 inch)

Front differential pinion shaft No.1 outer diameter 16.982 mm (0.6686 inch)

Front differential side gear thrust washer
0.95 mm (0.0374 inch)
1.00 mm (0.0394 inch)
1.05 mm (0.0413 inch)
1.10 mm (0.0433 inch)
1.15 mm (0.0453 inch)
1.20 mm (0.0472 inch)

Front differential case x Front differential ring gear 77.4 Nm (789 kgf-cm, 57 ft. lbs.)