Connecting Rod: Specifications

Connecting rod
Thrust clearance
STD 0. 16 - 0.36 mm (0.0063 - 0.0142 inch)
Maximum 0.36 mm (0.0142 inch)
Connecting rod thickness 19.788 - 19.840 mm (0.779 - 0.781 inch)
Connecting rod bearing center wall thickness
Reference
Mark 1 1.488 - 1.492 mm (0.0586 - 0.0587 inch)
Mark 2 1.492 - 1.496 mm (0.0587 - 0.0589 inch)
Mark 3 1.496 - 1.500 mm (0.0589 - 0.0591 inch)
Connecting rod oil clearance
STD 0.016 - 0.040 mm (0.0006 - 0.0016 inch)
Maximum 0.06 mm (0.0024 inch)
Rod out-of-alignment
Maximum per 100 mm (3.94 inch) 0.05 mm (0.0020 inch)
Rod twist
Maximum per 100 mm (3.94 inch) 0.05 mm (0.0020 inch)
Bushing inside diameter 18.010 - 18.019 mm (0.7091 - 0.7094 inch)
Piston pin diameter 17.988 - 18.007 mm (0.7086 - 0.7089 inch)
Bushing oil clearance
STD 0.009 - 0.015 mm (0.0003 - 0.0006 inch)
Maximum 0.05 mm (0.0020 inch)
Connecting rod bolt diameter
at tension portion STD 6.6 - 6.7 mm (0.260 - 0.264 inch)
Minimum 16.4 mm (0.252 inch)
Connecting rod cap x Connecting rod
1st 15Nm (150 kgf-cm 11 ft. lbs.)
2nd Turn 90° Nm (Turn 90° kgf-cm, Turn 90° ft. lbs.)