Disassembly and Assembly

DISASSEMBLY
1. REMOVE SNAP RING
Using snap ring pliers, remove the snap ring.
2. REMOVE AXLE HUB





a. Using SST, remove the axle hub.
SST 09520-00031 (09520-00040, 09521-00010 09521-00020)





b. Using SST, remove the inner race (outside) from the axle hub.
SST 09950-40011 (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04011, 09957-04010, 09958-04011), 09950-60010 (09951-00370)
3. REMOVE DUST COVER
Using a torx wrench (T30), remove the 3 bolts and dust cover.
4. REMOVE BEARING FROM STEERING KNUCKLE
a. Place the inner race (outside) on the bearing.





b. Using SST and a press, remove the bearing from the steering knuckle.
SST 09527-17011, 09950-60010 (09951-00600), 09950-70010 (09951-07150)

REASSEMBLY





1. INSTALL BEARING
Using SST and a press, install a new bearing to the steering knuckle.
SST 09950-60020 (09951-00680), 09950-70010 (09951-07150)
2. INSTALL DUST COVER
Using a torx wrench (T30), install the dust cover with the 3 bolts.
Torque: 8.3 Nm (85 kgf-cm, 74 inch lbs.)





3. INSTALL AXLE HUB
Using SST and a press, install the axle hub.
SST 09608-32010, 09950-60020 (09951-00680), 09950-70010 (09951-07150)

NOTICE: Be careful not to damage the bearing.

4. INSTALL SNAP RING
Using snap ring pliers, install a new snap ring.