Compressor Clutch Relay: Testing and Inspection
MAGNETIC CLUTCH RELAYINSPECTION
1. REMOVE BATTERY
2. REMOVE MAGNETIC CLUTCH RELAY (Marking: A/C COMP) FROM ENGINE ROOM R/B
3. INSPECT MAGNETIC CLUTCH RELAY
a. Inspect the relay continuity.
1. Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay.
2. Check that there is no continuity between terminals 3 and 5.
If there is continuity, replace the relay.
b. Inspect the relay operation.
1. Apply battery positive voltage across terminals 1 and 2.
2. Using an ohmmeter, check that there is continuity between terminals 3 and 5.
If there is no continuity, replace the relay.
4. REINSTALL MAGNETIC CLUTCH RELAY
5. REINSTALL BATTERY