Parking Brake Lever: Service and Repair

REPLACEMENT
1. REMOVE CONSOLE BOX ASSY REAR
a. Remove the console box insert and console box damper RR.





b. Remove the 4 bolts.
c. Disconnect the connector, and remove the console box assy rear.
2. REMOVE PARKING BRAKE LEVER SUB-ASSY





a. Disconnect the parking brake switch connector from the parking brake switch.
b. Remove the lock nut and adjusting nut from the parking brake cable assy No.1.





c. Remove the 2 bolts.





d. Using a screwdriver, raise the pick on the parking brake lever, and remove the parking brake cable assy No.1 from the parking brake lever.
e. Remove the parking brake lever from the body.





3. REMOVE PARKING BRAKE SWITCH ASSY
a. Remove the screw and parking brake switch assy.





4. INSTALL PARKING BRAKE SWITCH ASSY
a. Install the parking brake switch to the parking brake lever sub-assy with the screw.
5. INSTALL PARKING BRAKE LEVER SUB-ASSY





a. Install the parking brake cable assy No.1 to the parking brake lever, temporarily tighten the adjusting nut and lock nut.
b. Using a screwdriver, fix the parking brake cable No.1 to the pick.





c. Install the parking brake lever with the 2 bolts.
Torque: 12.5 Nm (130 kgf-cm, 9 ft. lbs.)





d. Connect the parking brake switch connector to the parking brake switch.
6. INSPECT PARKING BRAKE LEVER TRAVEL
7. ADJUST PARKING BRAKE LEVER TRAVEL
8. INSTALL CONSOLE BOX ASSY REAR
a. Connect the connector to the console box assy rear.





b. Install the console box assy with the 4 bolts.
c. Install the console box insert and console box damper RR.