DTC 614

DTC P3009/614 HIGH VOLTAGE POWER SHORT CIRCUIT

DTC Detection Condition:

CIRCUIT DESCRIPTION

Wiring Diagram:

Step 1 - 2:

Step 3 - 4:

Step 5:

Step 6 - 7:

Step 8 - 9:

Step 10 - 11:

Step 12 - 13:

Step 14 - 15:

Step 16 - 17:

Step 18:

Step 19 - 20:

Step 21 - 22:

Step 23 - 24:

Step 25 - 26:

Step 27 - 28:

Step 29:

INSPECTION PROCEDURE

CAUTION:
- Before inspecting the high-voltage system, take safety precautions to prevent electrical shocks, such as wearing insulated gloves and removing the service plug grip. After removing the service plug grip, put it in your pocket to prevent other technicians from reconnecting it while you are servicing the high-voltage system.
- After disconnecting the service plug grip, wait for at least 5 minutes before touching any of the high-voltage connectors or terminals.

HINT: At least 5 minutes is required to discharge the high-voltage condenser inside the inverter.